• About
  • Parent Page
  • Archives
  • Uncategorized
  • Google Translate

    English French German Spain Italian Dutch Russian Portuguese Japanese Korean Arabic Chinese Simplified

    Bunyi Beep Menurut BIOS

    Jumat, 26 November 2010

    Jika komputer dihidupkan pertama kali dan atau restart kamu akan mendengar bunyi “tiit” sekali, itulah yang dimaksud dengan bunyi “Beep”. Bunyi beep dipakai oleh bios saat POST (Power On Self Test) untuk melaporkan kondisi sistem tertentu. Jika kamu mendengar bunyi beep tapi lain dari biasanya itu berarti sistem sedang mengalami masalah sebelum bisa menampilkannya di monitor.
    Dengarkan bunyi beep itu baik-baik catat panjang-pendek bunyinya, karena masing-masing bunyi beep antar vendor Bios tidaklah sama, jadi kenali dulu merek Bios kamu sebelum memulai identifikasi. Di bawah ini ada beberapa kode beep dari beberapa vendor Bios.
    Beep BIOS


    AMI (American Megatrends') BIOS

    Beep Codes

    Message
    one short DRAM refresh failure (Problem with memory)
    two short Parity circuit failure
    three short Base 64K RAM failure
    four short System Timer failure
    five short Processor failure
    six short Keyboard Controller / Gate A20 failure
    seven short Virtual Mode Exception error
    eight short Display Memory Read/Write failure (fault with video card)
    nine short ROM BIOS Checksum error (fault with BIOS chip)
    ten short CMOS Shutdown Read/Write error
    eleven short Cache memory
    one long Passed (no errors)
    one long, two short Video failure
    one long, three short Base / Extended Memory failure
    one long, eight short Display / Retrace Test failure


    AST Research BIOS


    Beep Codes 

    Message 
    one
    short
    Low level processor verification test failed (POST 1)
    two
    short
    Clearing keyboard controller buffers failed (POST 2)
    three
    short
    Keyboard controller reset failed (POST 3)
    four
    short
    Low level keyboard controller interface test (POST 4) 
    five
    short
    Reading data from keyboard controller failed (POST 5) 
    six
    short
    System board support chip initialization failed (POST 6)
    seven
    short
    Processor register read/write verify test failed (POST 7) 
    eight
    short
    CMOS timer initialization failed (POST 8) 
    nine
    short
    ROM BIOS checksum test failed (POST 9) 
    ten
    short
    Initialize primary video (POST 10) 
    eleven
    short
    8254 timer channel 0 test failed (POST 11) 
    twelve
    short
    8254 timer channel 1 test failed (POST 12) 
    thirteen
    short
    8254 timer channel 2 test failed (POST 13) 
    fourteen
    short
    CMOS power-on and time test failed (POST 14) 
    fifteen
    short
    CMOS shutdown byte test failed (POST 15) 
    one
    long
    DMA channel 0 test failed (POST 16)
    one
    long, one short
    DMA channel 1 test failed (POST 17) 
    one
    long, two short
    DMA page register test failed (POST 18) 
    one
    long, three short
    Keyboard controller interface test failed (POST 19) 
    one
    long, four short
    Memory refresh toggle test failed (POST 20) 
    one
    long, five short
    First 64 KB memory test failed (POST 21) 
    one
    long, six short
    Setup interrupt vector table failed (POST 22) 
    one
    long, seven short
    Video initialization failed (POST 23) 
    one
    long, eight short
    Video memory test failed (POST 24) 

    Award BIOS 

    Beep Codes

    Message 
    one short Passed (no errors) 
    two short Any non-fatal error 
    one long, two short Video failure 
    one long, three short Keyboard Controller failure (applies to 286, 386 and 486) 


    Compaq BIOS


    Beep Codes

    Message 
    one short
    Indicates that the system
    is booting properly
    two short
    General BIOS error - remedy
    unknown


    one short, two long

    Memory Module

    one long, one short

    BIOS ROM checksum error

    one long, two short


    Video error

    7 Beeps: one long, one
    short, one long, one short, pause, one long, two short

    AGP Video

    one long continuous tone

    Memory Module

    IBM BIOS 

    Beep Codes

    Message 
    none Power Supply or System Board failure (possible short) 
    one short  Passed (no errors) 
    one short (blank screen) Video error (check cable) 
    one short (no boot) Floppy Drive error 
    two short Configuration Error (displayed on screen) 
    repeating short Power Supply or System Board failure 
    continuous Power Supply or System Board / Keyboard stuck 
    one long, one short System Board failure 
    one long, two short Video
    (Mono/CGA) failure (check cable) 
    one long, three short  Video
    (EGA) failure (check cable) 
    three long Keyboard Card error 


    Mylex
    BIOS

    Beep Codes

    Message 

    one


    Normal boot

    two

    Video adapter error

    three

    Keyboard controller error

    four

    Keyboard error

    five

    PIC 0 error


    six

    PIC 1 error

    seven

    DMA page register error

    eight


    RAM refresh error

    nine

    RAM data error

    ten

    RAM parity error

    eleven

    DMA controller 0 error

    twelve

    CMOS RAM error


    thirteen

    DMA controller 1 error

    fourteen

    CMOS RAM battery error

    fifteen


    CMOS RAM checksum error

    sixteen

    BIOS ROM checksum error

    Mylex
    386 BIOS

    Beep Codes

    Message 

    one long


    Normal boot

    two long

    Video adapter error

    one long, one short, one
    long

    Keyboard controller error

    one long, two short, one
    long

    Keyboard error

    one long, three short, one
    long

    PIC 0 error


    one long four short, one
    long

    PIC 1 error

    one long, five short, one
    long

    DMA page register error

    one long, six short, one
    long


    RAM refresh error

    one long, seven short, one
    long

    RAM data error

    one long, eight short, one
    long

    RAM parity error

    one long, nine short, one
    long

    DMA controller 0 error

    one long, ten short, one
    long

    CMOS RAM error


    one long, eleven short, one
    long

    DMA controller 1 error

    one long, twelve short, one
    long

    CMOS RAM battery error

    one long, thirteen short,
    one long


    CMOS RAM checksum error

    one long fourteen short,
    one long

    BIOS ROM checksum error

    Phoenix BIOS 

    Beep Codes 

    Message 
    one, one, three CMOS Read/Write 
    one, one, four ROM BIOS Checksum failure 
    one, two, one Programmable Interval Timer failure 
    one, two, two DMA Initialisation failure 
    one, two, three DMA Page Register Read/Write failure 
    one, three, one RAM Refresh Verification error 
    one, three, three First 64K RAM Chip/Data Line failure 
    one, three, four First 64K RAM Odd/Even Logic 
    one, four, one First 64K RAM: Address Line 
    one, four, two First 64K RAM: Parity failure 
    one, four, three Fail-Safe Timer Feature (EISA only) 
    one, four, four Software NMI Port failure (EISA only) 
    two (followed by various combinations) First 64K RAM Chip/Data Line failure (combinations indicate which bit) 
    three, one, one Slave DMA Register failure 
    three, one, two Master DMA Register failure 
    three, one, three Master Interrupt Mask Register failure 
    three, one, four Slave Interrupt Mask Register failure 
    three, two, four Keyboard Controller failure 
    three, three, four Display Memory failure 
    three, four, one Display Retrace failure 
    three, four, two Video ROM search proceeding 
    four, two, one Timer Tick failure 
    four, two, two Shutdown failure 
    four, two, three Gate A20 failure 
    four, two, four Unexpected Interrupt in Protected Mode 
    four, three, one RAM test above 64K failure 
    four, three, two/three Programmable Interval Timer, Channel 2 failure 
    four, three, four Realtime Clock failure 
    four, four, one Serial Port error 
    four, four, two Parallel Port error 
    four, four, three Math Co-processor failure 
    (tone) one, one, two System Board Select 
    (tone) one, one, three Extender CMOS RAM 




    Quadtel BIOS

    Beep Codes

    Message 
    one short
    Indicates that the system
    is booting properly
    two short
    CMOS IC error

    one long, two short


    Video error

    one long, three short

    Peripheral controller error



    0 comments:

    Posting Komentar